Standard Offering

Standard Offering – Starting Current of 3-3.5Ifl*

  • We use closed loop control using a PLC
  • We provide reduced voltage starting method of motor with FCMAplus technology as per IEC 60076-6 and IS5553 (Part 3)
  • FCMAplus soft starters are designed specific to each motor, analysing motor and load torque speed curves, current speed, and moment of inertia. Starting current can be reduced from 3- 3.5Ifl* typically
  • These are typical starting current values based on design and customer experience. Actual measurement may vary based on actual site condition
  • Our offering is provided with a main switching contactor, soft starter with bypass contactor along with metering and protection for the motor with a customer requested make of MPR/Overload relay
  • These panels can also be provided with an isolating device like MCCB /SFU/ ACB as required by the customer

*These are typical starting current values based on design and customer experience. Actual measurement may vary based on actual site condition.